Cumbres And Toltec Shops Animated Logo

 

Cumbres And Toltec Shops Up-Dates
2005

October week-3

 

Click On Any Photo To See Large Version
Use Your Back Button To Return

There's my Brother in the middle with the Mustache at the dedication of the New Conejos County Jail, He has come back to Law Enforcement and has joined on again with Conejos County, I would have to say, that law enforcement in a rural setting can be some of the most difficult jobs I know and I am extremely proud of my Brother, What a Guy and what a great father to my Nephew and Niece.

Ole' Diesel 19 at Cumbres, Colorado... I will have the whole story on these picture's coming up in future updates..

And another shot of Diesel 19, it has taken me a while, but starting in future updates, I will began a comprehensive photo study of diesel 19 for the Modelers who visit this Website...I hope to photograph every single detail of 19 from the cab controls to motors to help you out there make a great model of her.. keep your eyes open.... and I think I will do the same for Cook Car 053.

Early morning Antonito.. 484 is being prepared for a run today, its a little cold as 484's steam rises into the Air.

484 is backing to the coal dock.

484 gets herself all steamed up!

484 in a reflection..

With all the passengers aboard, 484 and its train pull out of Antonito.

Caboose 0306 brings up the rear, it has been putting in alot of miles.. as it is the only Caboose in service..

484 ran the Legislature train without a hitch.. all the way to Chama.

My tracks lead up the dock as I am coaling 488 for her run.

The snow would speed up and slow down, its was actually extremely beautiful.

I made a Boo-Boo, after I checked my picture's, I realized I had left the headlight off....

484 has been coaled and the cab steam cleaned, I am kinda picky, I don't like a speck of ash or dust in my cab after dropping the fire in the morning.

488 as the water tank...

We decided to send Fire patrol ahead as a Rock patrol, but it was facing the wrong direction...

So with the backhoe we spun it around on the road crossing.

This is a EBT hopper, but think anything is out of place, a old Rio Grande logo was just tested on the side of this hopper, before applying the stencil to a freshly painted restored car.

Welcome to White Sands in New Mexico.... we have set up the Basket and our Pilot Clarke is doing a Burner test with another Pilot. His wife and Crew Chief Ailene is setting up the fan to cold inflate the envelope.

We were extremely limited in how much space would could fly in, so the flights were kinda short.

Viento Encantado lifts into the air.

This place is so amazing, the white Gypsum sand is cool... it reminded me of snow.

Balloons begin to inflate at White Sands.

Looking towards the sun, another view of the balloons appears...

We actually chased the balloons along the roadway in White Sands.

This place is spectacular even though we were so limited in flight.

The clouds and skies were beautiful with the Balloons against them.

I will show you a few more views of White Sands and in future updates I will share the Alburquerque Balloon Fiesta with you...

Hey check this out, its a Southern Pacific Bay Window Caboose in Silverton.

You know I would have loved to ride in a Bay Window caboose down a mainline at High speed, meeting a train in a siding would be cool, probably feel like you were gonna get hit hanging out of the side like that.

There's Motor car 2038 and another Beautiful Rio Grande Motor Car in Silverton.

After turning on the wye a D&S train rolls backward into Silverton.

There's our Friend Mike May riding the rear platform with another brakeman and his Conductor... way to go Mike!

Locomotive 481 rolls her train back into Silverton, onboard is Engineer Joe Dailey and Fireman John Hillie.

Cook Car 053 at Osier, I will have more of 053 in route along the railroad in future updates, keep your eyes open.

Welcome to the new Conejos County Jail and Detention Facility. I will talk more about new jail, as my father was involved in the initial funding when he was a Conejos County Commissioner and my Brother will be working there.

Well the work continues on the new track in Antonito to the new Car Repair Shop.

Rudy, Joseph and Ray are working on Hand Tamping the ballast into the new switch, Rudy told me this Switch came out great and it did, it throws with one hand, Beautiful work.

The Guys use a Electrically driven Hand Tamping Machine to do this work.

Rudy and Joe are working opposite of each other to tamp a tie and Ray adds ballast as needed.

Its a team effort and after so many years together the Guys work like Clockwork.

Now this shot gives you a idea of the location of the new Track, the passenger car is on the original loop track behind them.

Looking back to the tank and the Two new switches.

Orlando is in the distance on the Backhoe cutting dirt to make the new grade for the tracks heading into the shop, they are close....There will be more Pictures coming soon, I am going to take more pictures today and talk with the crew.

Ain't that a Beauty, recently I was invited to ride along with RodRunners of Las Cruces, New Mexico... a Car Club in Southern New Mexico. I was also invited into a Top of the Line Car restoration Shop and I will share all that with you in coming updates.. Have a great one, see ya later, Carlos

 

Site provided & maintained by Chama Dot Com © Copyright 2000, Chama Dot Com